Vintage Honda Motorcycle Fuel Valve Petcock – 16mm x 1.5mm – CB350/400/550/750

Description

Fuel Valve Petcock 16 x 1.5mm
Fuel valve / petcock for numerous Honda motorcycles, and many other brands of motorcycle, scooter and moped.
Check the threading on your bike to be sure this is what you need before you buy.
Many of the compatible models listed below used this 16 x 1.5mm petcock for part of the production run, then switched to a different size, sometimes in the same production year.
On / Off / Reserve. Built in fuel filter. Fuel exits to the side. Comes with rubbery sealing washer for a tight fit with no leaks.
Threading = 16 x 1.5mm
22mm hex nut.
Ribbed fuel outlet perfect size for use with either 3/16″ or 1/4″ fuel line.
Replaces Honda part number: 16950-393-015
Will also work in place of Honda part numbers: 16950-410-015, 16950-388-015, 16950-388-005, 16950-447-015
Fits Honda:
MR175 – 1977
XL250S – 1978-1981
CB350K Twin – 1968-1973
CL350K Scrambler – 1968-1973
XL350 – 1977-1978
CJ360T – 1975-1976
CB400A Hondamatic – 1978
CB400T Hawk – 1980-1981
CB400TI Hawk I – 1978-1979
CB400TII Hawk II – 1978-1979
CM400A Hondamatic – 1979-1981
CM400C Custom – 1981
CM400E – 1980-1981
CM400T – 1979-1981
CB500T Twin DOHC – 1976
CX500 – 1978-1979
CB550F Super Sport – 1977 (check your tank first, ’75-’76 tanks use a 20mm petcock)
CB550K – 1977-1978 (check your tank first, 75-76 tanks use a 20mm petcock)
CB750A Hondamatic – 1976-1978
CB750F Super Sport – 1977-1978 (Does not fit 1975 – 1976 CB750F F0)
CB750F Super Sport – 1979 (VIN# RC04-2000023 – RC04-2010669)
CB750F Super Sport – 1980 (VIN# RC04-2100003 – RC04-2116089)
CB750K – 1977-1978 (Does not fit 1975 K4 & 1976 K5)
CB900C Custom – 1980 (VIN# SC04-2000046 – SC04-2015593)
and many others . .
4into1motorcycleparts
•
Store Policies